09-22-2010 06:04 AM - edited 03-03-2019 06:03 AM
Hi,
I have problem with c851 config - I would like to set up additional IP addres to WAN interface (I done it - secondary IP on WAN, but its not working, - additional IP is not responding from outside)
(next, I will forward all traffic in both sides from public IP to internal)
This is my router config, could you give me some hints (as you can see ipsec is working on this too.?
thx
Current configuration : 3735 bytes
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime
service password-encryption
service sequence-numbers
!
hostname NEW
!
boot-start-marker
boot-end-marker
!
logging buffered 128000 errors
!
aaa new-model
!
!
aaa authentication login default local
!
!
aaa session-id common
clock timezone PCTime 1
!
!
dot11 syslog
!
dot11 ssid MWWifi
vlan 20
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.116.0.1 10.116.0.99
ip dhcp excluded-address 10.116.0.149 10.116.0.255
!
ip dhcp pool company
import all
network 10.116.0.0 255.255.255.0
default-router 10.116.0.1
dns-server 10.1.1.1 10.1.1.2
domain-name company1.local
netbios-name-server 10.1.1.1 10.1.1.2
lease 7
!
!
ip cef
no ip bootp server
no ip domain lookup
ip domain name company1.local
!
!
!
10-19-2010 03:44 PM
The additional IP address will only respond if your service provider routes traffic to that address for you.
With most providers, you have to pay for each IP address that you plan to use. You can't just add another address. Well, you can (and you did) but the provider will never send you traffic destined to that address,
Does the upstream device recognize and allow xxx.xxx.111.250?
What is interface FastEthernet4 attached to?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: