Adding drives to an MCS for RAID1

Unanswered Question
Sep 22nd, 2010
User Badges:

Client with 7825H 3.0 servers. These servers appear to come with a RAID controller (Broadcom|CSB6 RAID/IDE Controller), but have only one drive. Anyone know if it's possible to add a drive for RAID1, and if UCM6.x/7.x can support it?


Thanks in advance,


Brian

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Matthew Kaufman Wed, 09/22/2010 - 11:06
User Badges:
  • Cisco Employee,

If you're talking about the MCS-7825H-3.0-IPC server, it may support RAID but as far as I know this was never tested.  Only the newer 7825's with removable SATA drives have been tested in that configuration.


You can give it a try and see what happens, but it wouldn't be a supported configuration.


--Matt

Brian Carscadden Wed, 09/22/2010 - 11:07
User Badges:

Thanks Matt. I have a few lab servers of the same vintage. I'll give it a go when time permits.

Actions

This Discussion