MC16C line card stuck in L2 only mode

Unanswered Question
Sep 22nd, 2010
User Badges:

I have a UBR 7246VXR with MC16C line cards in it.  They are tied to a bundled interface.  I have removed cable line card 4/0 from the bundle and tried to assign as IP address to it, but it says "IP addresses may not be configured on L2 links".  I have never seen this before.  Anyone know how to fix this?


Thanks,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bmurray000 Tue, 09/28/2010 - 14:36
User Badges:

Well I found the answer to this one so I thought I would share it:


As of Cisco IOS Release 12.3(21)BC, all cable line cards are automatically part of virtual bundles.  Removing a line card from one bundle means it has to be configured as part of another virtual bundle.

Yaroslav.Kucher Sat, 11/27/2010 - 09:43
User Badges:

I've spend a lot of time trying to manage exactly the same problem until I found your post.

Thank you very much.

Actions

This Discussion