CNF file creation error with CME 8.0

MD ARMAN HOSSAIN · ‎09-22-2010

Gettign the following error messages when I am trying to create cnf files

ME-ROUTER-A(config-telephony)#create cn

CME-ROUTER-A(config-telephony)#create cnf-files

Creating CNF files

Sep 23 03:43:43.131: Can't open file XMLDefault7962-7916-24-1.cnf.xml for write

Sep 23 03:43:43.487: Can't open file XMLDefault7962-7914-2.cnf.xml for write

Sep 23 03:43:43.843: Can't open file XMLDefault7962-7915-12-2.cnf.xml for write

Sep 23 03:43:44.199: Can't open file XMLDefault7962-7915-24-2.cnf.xml for write

Sep 23 03:43:44.555: Can't open file XMLDefault7962-7916-12-2.cnf.xml for write

Sep 23 03:43:44.911: Can't open file XMLDefault7962-7916-24-2.cnf.xml for write

Sep 23 03:43:45.267: Can't open file XMLDefault7965.cnf.xml for write

Any fix for this?

Regards,

Arman

Aaron Harrison · ‎09-23-2010

Hi

Do you have a command like 'cnf-files location' under your telephony-service config? Sounds like it may be set to somewhere non-writable... or perhaps that location is full?

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

MD ARMAN HOSSAIN · ‎09-23-2010

Yeah I have a command cnf-file location which I set to cnf-file location tftp. But even though I did not set that command the router should use the default location which is system/ins. Bu tin my case it is giving error message without cnf file location command. Any reason why I have to use this command and what is his purpose as it has options flash or tftp?

Regards

Arman Hossain

Aaron Harrison · ‎09-24-2010

Hi

Sounds like the cnf-files location is misconfigured. Try pointing it at flash:

Then do a create cnf-files

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Steven Holl · ‎09-24-2010

Or just point the CNF files to memory. You don't need to store them any place specifically.

Issue:

telephony-service

no cre cnf loc tftp

no cre cnf loc flash

cre cnf

If you still have issues, get the output of:

sh run

sh telephony-service all

sh flash:

dir system:/its/vrf1/