Cisco 877-k9 - no ping to wan address on sub-if atm0.1 from cli

Unanswered Question
Sep 23rd, 2010
User Badges:

Hi all.


Please, anyone can tell me what i'm doing wrong?


From router cli, ping to the ip address on sub-if atm 0.1 fails (atm0 and atm0.1 are up ). Ping to internet addresses doesn't work.


Thanks in advance


The config:


Building configuration...

Current configuration : 2675 bytes
!
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
no service dhcp
!
hostname xxx
!
boot-start-marker
boot-end-marker
!
logging buffered 4096
enable secret xxxx
!
aaa new-model
!
!
aaa authentication login default local
!
!
aaa session-id common
!
!
no dot11 syslog
ip cef
!
!
!
!
no ip domain lookup
ip domain name xxxxx
!
multilink bundle-name authenticated
!
!
username xxxxx password xxxxxxx
!
!
archive
log config
  hidekeys
!
!
!
!
!
interface ATM0
no ip address
no ip proxy-arp
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address 80.xx.xx.93 255.255.255.0
ip access-group 107 in
no ip proxy-arp
ip accounting output-packets
ip nat outside
ip virtual-reassembly
pvc 8/32
  encapsulation aal5snap
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address 192.168.10.254 255.255.255.0
no ip proxy-arp
ip accounting output-packets
ip nat inside
no ip virtual-reassembly
ip tcp adjust-mss 1412
!
ip forward-protocol nd


ip route 0.0.0.0 0.0.0.0 ATM0.1
!        
!
ip http server
no ip http secure-server
ip nat inside source list 1 interface ATM0.1 overload
!
logging trap debugging
logging facility syslog

access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.168.10.0 0.0.0.255

access-list 100 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 100 permit ip 192.168.10.0 0.0.0.255 host xxxxxxxxxx

access-list 107 deny   ip 127.0.0.0 0.255.255.255 any log
access-list 107 deny   ip 192.168.10.0 0.0.0.255 any log
access-list 107 deny   icmp any any redirect log
access-list 107 permit ip any any log

snmp-server community xxxxx RO
no cdp run
!
!
!
!
control-plane
!
!
line con 0
exec-timeout 120 0
no modem enable
stopbits 1
line aux 0
line vty 0 4
access-class 99 in
exec-timeout 15 0
transport input telnet ssh
!
scheduler max-task-time 5000
!
webvpn context Default_context
ssl authenticate verify all
!
no inservice
!
end

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content