ACE: Getting booted off after logging into admin context

Unanswered Question
Sep 23rd, 2010

any particular reason why after logging into any context I'm getting kicked off. so for example I telnet to mgt addr configured on admin context and get prompted to enter username followed by password. i enter the correct username and password, but upon doing so i'm getting kicked off.

the username and password is definately right..

anyone seen this before?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
yushimaz Thu, 09/23/2010 - 20:27

Do you try to login with default username/password (admin/admin)?

If so, you may rejected with the following message.

ACE20 login: admin

Password:

Cisco Application Control Software (ACSW)

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html.

Please change the password for admin user.

Admin is allowed only on the supervisor until the password is changed

User 'www' is disabled.Please change the password to enable the user.

Connection closed by foreign host.

If you don't have any message, please check the line with 'show users' command.

If lines become full, you can clear the line with 'clear line [line#]' command.

ACE20/Admin# show users

User                     Context

                Line         Login Time   (Location)    Role    Domain(s)

*admin                   Admin

                ttyS00       Sep 24 02:26               Admin   default-domain

admin                    Admin

                pts/0        Sep 24 02:32 (1.160.0.40)  Admin   default-domain

ACE20/Admin#

ACE20/Admin#

ACE20/Admin# clear line pts/0

ACE20/Admin#

If you cannot login even though lines are not full, please check 'show user-account' command.

Can you  access via ssh with same user?

ACE2/Admin# show user-account

user:admin

        this user account has no expiry date

        roles: Admin

        domain: default-domain

        Context: Admin

user:www

        this user account has no expiry date

        roles: Admin

        domain: default-domain

        Context: Admin

Regards,

Yuji

Actions

This Discussion