ASA in multi context mode and AAA based on context

Unanswered Question
Sep 23rd, 2010
User Badges:

Hello, running ASA5520 in multicontext mode, and would like to apply AAA in separate contexts; eg. context A and B should have AAA authentication and context C not.

I am familliar how to setup AAA in single firewall mode but not sure about correct procedure when setting up AAA in multicontext mode.

Is it possibe to configure individual contexts for AAA?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amitaaga Fri, 09/24/2010 - 14:07
User Badges:
  • Cisco Employee,

Hi,


Yes, it is possible to setup AAA in individual contexts. The procedure is going to be exaclty the same as when the firewall is in single context mode.


Just be careful while configuring command authorization on a firewall in multiple context.


http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/mgaccess.html#wp1060011


Hope it helps.


Thanks,

Amitashwa

Actions

This Discussion