09-23-2010 04:21 PM - edited 03-10-2019 05:08 AM
I just brought an SSM online. I think it is working but when I go in the module and do a show statistics I really don't see anything? Am I looking in the wrong place? Can you see a better representation of what is going on from the ASDM?
Harrison
09-23-2010 05:56 PM
Hi,
On the ASA, please do a "show service-policy" to see if packets are being re-directed to the SSM module. On the sensor, you can look at the output of "show statictics virtual-sensor" to see how if packets are being processes by the module.
Hope this helps!!
Thanks and Regards,
Prapanch
09-29-2010 11:19 AM
You can also run a packet tracer for an imaginary packet and see if it is going to hit your SSM module.
To divert traffic from the ASA ro the module you will need something like
access-list ssm-acl extended permit
class-map csc-class
match access-list ssm-acl
policy-map global_policy
class ssm-class
csc fail-open
I hope it helps.
PK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide