09-23-2010 09:56 PM - edited 03-04-2019 09:53 AM
Dear Team,
We have Cisco2621XM router, where in the below IP SLA is not supporting. Refering the Cisco feature navigator, understood that the below features will support c2600-ik9s-mz.122-46a.bin. But i am not able to execute IP SLA command in config mode.
The below are the features captured from Cisco feature navigator and the same are not supporting in c2600-ik9s-mz.122-46a.bin IOS.
IP SLAs - DHCP Operation
IP SLAs - Distribution of Statistics
IP SLAs - DLSW+ Operation
IP SLAs - DNS Operation
IP SLAs - FTP Operation
IP SLAs - History Statistics
IP SLAs - HTTP Operation
IP SLAs - ICMP Echo Operation
IP SLAs - ICMP Path Echo Operation
IP SLAs - One Way Measurement
IP SLAs - Reaction Threshold
IP SLAs - Scheduler
IP SLAs - SNA LU2 Echo
IP SLAs - SNMP Support
IP SLAs - TCP Connect Operation
IP SLAs - UDP Echo Operation
IP SLAs - UDP Jitter Operation
Solved! Go to Solution.
09-24-2010 04:49 AM
I've chosen the same features for IP SLA with Features Navigator and the lowest IOS version that support what you need it's 12.3, Enterprise features set.
See attachement.
I have here a 2600 with c2600-i-mz.123-1.bin, and:
(config)#rtr ?
<1-2147483647> Entry Number
key-chain Use MD5 authentication for RTR control message
low-memory Configure low water memory mark
reaction-configuration RTR Reaction Configuration
reaction-trigger RTR trigger assignment
reset RTR Reset
responder Enable RTR Responder
restart Restart an active entry
schedule RTR Entry Scheduling
slm Service Level Management
I think you have to upgrade.
Calin
09-24-2010 04:22 AM
Does it work with rtr command instead of ip sla ?
Cheers,
Calin
09-24-2010 04:30 AM
09-24-2010 04:49 AM
I've chosen the same features for IP SLA with Features Navigator and the lowest IOS version that support what you need it's 12.3, Enterprise features set.
See attachement.
I have here a 2600 with c2600-i-mz.123-1.bin, and:
(config)#rtr ?
<1-2147483647> Entry Number
key-chain Use MD5 authentication for RTR control message
low-memory Configure low water memory mark
reaction-configuration RTR Reaction Configuration
reaction-trigger RTR trigger assignment
reset RTR Reset
responder Enable RTR Responder
restart Restart an active entry
schedule RTR Entry Scheduling
slm Service Level Management
I think you have to upgrade.
Calin
09-26-2010 10:54 PM
Hi Calin ,
The configuration is fine after IOS upgrade. Thanks for your inputs.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: