Hi
Voice VLANs are nothing different to any other access VLAN (barring the fact that it is presented as dot1q trunked at the edge port rather than as untagged traffic).
As such, if your other access VLANs are large L2 domains crossing switch blocks, the VVLANs probably will be as well.
Best practice for both is not to do that, so if (for example) you have a routed distribution layer and unique access VLANs per edge switch block, then you would mirror that configuration with your VVLANs.
Regards
Aaron
Please rate helpful posts..
Aaron
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!