Dial-Peer configuration

Unanswered Question
Sep 24th, 2010

Good day all,

I face a problem with the incoming calls.

I have 4 isdn lines.

1 isdn number is 181

2 isdn number is 030

3 msn 1 --> 472 msn 2--> 006

4 isdn DDI 540-9 (it isn't in use yet)

1st problem

Our customer would like to make 2 groups for the corlist incoming call.
The first group can use only the first and the fourth isdn and the other group only the second and the third.

I have configure it as following but every body can use all the lines.

2nd problem

In the trird line the msn 1 is used by a fax. When I connect this line to the fxs port, the fax dosen't ring. If I connect it from the netmod's ab1 to the fax, it works. The second MSN it is used by an internal phone.

3rd problem

The other problem is in the voice port 1/0/0 used only for the trunk group FCT when somebody calls to a cellular phone. I can make calls via this port, but noboby can call the number of the FCT.

What I am doing wrong?

Thanking you in advance

Ioanna

!
trunk group FCT
!
!
trunk group lawyer1
!
!
trunk group lawyer2
!
!
trunk group dot

!
voice translation-rule 500
rule 1 /^01/ /1/
!
voice translation-rule 600
rule 1 /^000/ /00/
!
voice translation-rule 900
rule 1 /006/ /1103/
!
!
voice translation-profile International
translate called 600
!
voice translation-profile MoreDigits
translate called 500
!
voice translation-profile profile
translate called 900

interface BRI1/0
description 181
no ip address
ip flow ingress
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
trunk-group dot
!
interface BRI1/1
description 006
no ip address
ip flow ingress
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
trunk-group lawyer1
!
interface BRI1/2
description 030
no ip address
ip flow ingress
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
trunk-group lawyer2

voice-port 1/0/0
trunk-group FCT
cptone GR
impedance complex2
!
voice-port 1/0/1
trunk-group FCT
cptone GR
impedance complex2

voice-port 1/0/8
compand-type a-law
cptone GR
connection plar 1000
bearer-cap Speech
!
voice-port 1/0/9
translation-profile incoming profile
compand-type a-law
cptone GR
bearer-cap Speech
!
voice-port 1/0/10
compand-type a-law
cptone GR
connection plar 1000
bearer-cap Speech
!
voice-port 1/0/11
compand-type a-law
cptone GR
bearer-cap Speech

dial-peer cor custom
name national
name international
name mobile
name internal
name BRI1/0
name BRI1/1
name BRI1/2
!
!
dial-peer cor list call-full
member national
member international
member mobile
member internal
!
dial-peer cor list BRI1
member national
member international
member mobile
member internal
member BRI1/0
!
dial-peer cor list BRI2
member national
member international
member mobile
member internal
member BRI1/1
!
dial-peer cor list BRI3
member national
member international
member mobile
member internal
member BRI1/2
!
!
dial-peer voice 100 pots
trunkgroup dot
corlist outgoing call-full
destination-pattern 02.........
direct-inward-dial
forward-digits 10
!
dial-peer voice 101 pots
corlist outgoing BRI2
destination-pattern 02.........
direct-inward-dial
port 1/0/9
forward-digits 10
!
dial-peer voice 102 pots
corlist outgoing call-full
destination-pattern 069........
direct-inward-dial
port 1/0/17
forward-digits 10
!
dial-peer voice 103 pots
corlist outgoing BRI2
destination-pattern 069........
direct-inward-dial
port 1/0/9
forward-digits 10
!
dial-peer voice 104 pots
destination-pattern 08.........
direct-inward-dial
port 1/0/8
forward-digits 10
!
dial-peer voice 105 pots
corlist outgoing BRI2
destination-pattern 08.........
direct-inward-dial
port 1/0/9
forward-digits 10
!
dial-peer voice 106 pots
translation-profile outgoing International
destination-pattern 000T
direct-inward-dial
port 1/0/8
forward-digits all
!
dial-peer voice 107 pots
corlist outgoing BRI2
translation-profile outgoing International
destination-pattern 000T
direct-inward-dial
port 1/0/9
forward-digits all
!
dial-peer voice 108 pots
translation-profile outgoing MoreDigits
destination-pattern 01T
direct-inward-dial
port 1/0/8
forward-digits all
!
dial-peer voice 109 pots
corlist outgoing BRI2
translation-profile outgoing MoreDigits
estination-pattern 01T
direct-inward-dial
port 1/0/9
forward-digits all
!
dial-peer voice 111 pots
destination-pattern 254472
port 1/0/4

dial-peer voice 112 pots
corlist outgoing BRI3
destination-pattern 02.........
direct-inward-dial
port 1/0/10
forward-digits 10
!
dial-peer voice 113 pots
corlist outgoing BRI3
destination-pattern 069........
direct-inward-dial
port 1/0/10
forward-digits 10
!
dial-peer voice 114 pots
corlist outgoing BRI3
destination-pattern 08.........
direct-inward-dial
port 1/0/10
forward-digits 10

!

dial-peer voice 115 pots
corlist outgoing BRI3
translation-profile outgoing International
destination-pattern 000T
direct-inward-dial
port 1/0/10
forward-digits all
!

ephone-dn  3  dual-line
number 1002
pickup-group 10
call-forward busy 1000
call-forward noan 1000 timeout 20
corlist incoming BRI2
corlist outgoing call-full
!
!
ephone-dn  4  dual-line
number 1101
pickup-group 10
call-forward busy 1000
call-forward noan 1000 timeout 20
corlist incoming BRI3
corlist outgoing call-full

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion