09-24-2010 09:41 PM
Hi all,
Is there any options to see what tunnels are passing through one router . for ex: i have logged in to R1 then how can i see which tunnels are passing through R1 and their status.
Regards
thanks in advance
mahesh
Solved! Go to Solution.
09-26-2010 02:22 AM
'show mpls traffic-eng tunnels role middle brief'. There are other options you can use as well such as 'show mpls traffic-eng tunnels role head brief' to show tunnels originating from R1 and 'show mpls traffic-eng tunnels role tail brief' to show tunnels terminating on R1.
Atif
09-25-2010 03:01 PM
Hi Mahesh,
Try this command:
sh mpls traffic-eng tunnels
HTH
Reza
09-26-2010 02:22 AM
'show mpls traffic-eng tunnels role middle brief'. There are other options you can use as well such as 'show mpls traffic-eng tunnels role head brief' to show tunnels originating from R1 and 'show mpls traffic-eng tunnels role tail brief' to show tunnels terminating on R1.
Atif
09-26-2010 09:24 PM
good one dear,
is there any option to see only explicit tunnels
regards
mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide