09-26-2010 05:28 PM
Hello I am getting the following errors on my
VPN Connection Attempts
Cisco Systems VPN Client Version 5.0.03.0560
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 3
Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1 19:59:14.375 09/26/10 Sev=Warning/3 CVPND/0xA340000D
The virtual adapter was not recognized by the operating system.
2 19:59:14.375 09/26/10 Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable
3 19:59:14.531 09/26/10 Sev=Warning/2 IKE/0xE300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
4 19:59:14.531 09/26/10 Sev=Warning/2 IKE/0xE30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2238)
09-26-2010 05:31 PM
Which Operating System is your Windows machine?
Also, is it 32-bit or 64-bit?
Has the same VPN Client software worked on the same machine before? has there been any change on your PC?
09-26-2010 05:40 PM
Running on: 5.1.2600 Service Pack 3 XPPro 32 bit
09-26-2010 06:02 PM
Please kindly check the following readme for VPN Client version 5.0.3.560:
http://www.cisco.com/web/software/282364316/22941/vpnclient-windows-5.0.03.0560.txt
Advisory:
The new client requires a kernel patch, KB952876, from Microsoft before installing first before installing the actual client.
REF: http://support.microsoft.com/kb/952876/en-us
Pls kindly check if you have kernel patch KB952876
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide