09-26-2010 11:28 PM - edited 03-11-2019 11:45 AM
Hello All,
I am having ASA 5510 on my site. I am also having 2 ISP links. the one link i want to use only for Internet surfing & other ISP link i want to use for VPN connection.
Can anyone tell me how to do that ?
Solved! Go to Solution.
09-27-2010 02:25 AM
Which VPN are you going to use the other ISP link for? It can only be used for static lan-to-lan vpn because you know the ip address hence you can configure static route for the peer address towards your ISP second link.
For remote access vpn or dynamic lan-to-lan, it would not work if the second ISP link is actually connected directly to the ASA, as ASA does not support default route being pointed out off 2 ASA interfaces.
09-27-2010 02:15 AM
Can Anyone REPLY On this post..????
Its very Important for me... Please.....
09-27-2010 02:25 AM
Which VPN are you going to use the other ISP link for? It can only be used for static lan-to-lan vpn because you know the ip address hence you can configure static route for the peer address towards your ISP second link.
For remote access vpn or dynamic lan-to-lan, it would not work if the second ISP link is actually connected directly to the ASA, as ASA does not support default route being pointed out off 2 ASA interfaces.
09-27-2010 02:38 AM
i want to establish Site-to-Site VPN between LAN..
Can u please tell me how i can use 2nd ISP link for Site-to-site VPN ?? & 1st ISP for Internet Browsing ?
09-27-2010 03:10 AM
For internet browsing:
route
For site-to-site VPN:
route
route
Hope that helps.
09-27-2010 03:12 AM
just nat your network
nat inside 1 ip range of lan and mask
global(outside)1 interface to which isp is connected
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: