Cisco CRS-1/8 to CRS-3/8 upgrade

Unanswered Question
Sep 27th, 2010
User Badges:

Hi Folks,


has any body done CRS-1/8 to CRS-3/8 upgrade smoothly ? from the CCO I could find only that it needs IOS-XR 4.0 and Fabric Upgrade.


just want to make  sure these are the only two actions to perform to make CRS-1 to CRS-3,


my upgrading procedure will be as follows


1. Upgrade the code to IOS-XR 4.0 with CRS-1 fabric.

2. once the router is loaded with 4.0, replace Fabric cards one by one.


Need your comments.


Rgds

Harin

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Tue, 09/28/2010 - 09:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Harin,


your procedure looks like reasonable, various rommon firmware upgrades should be part of first step as necessary.




Hope to help

Giuseppe

Actions

This Discussion