MeetingPlace Express 2.1.1.2 and CUCM 8.0

nshoe18 · ‎09-27-2010

Has anyone been able to integrate MPE 2.1.1.2 with CUCM 8?

Jaime Valencia · ‎09-27-2010

This configuration is untested by Cisco, however, if you configure a regular H323 integration between both systems it should work fine.

Are you facing issues?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

nshoe18 · ‎09-27-2010

I am facing issues getting MPE to pull users from CallManager......I thought I had it setup correctly but when I test the connection from MPE it tells me the CallManager is unavailable.

nshoe18 · ‎09-27-2010

So I was able to get the axl stuff to test good, but when I try to login with a user that is on my CUCM it tells me that user does not exist. Also I setup my gateway and route pattern on CUCM and configured the H.323 stuff according to the documentation in the wiki but when I dial the number I assigned I just get a busy signal.

nshoe18 · ‎09-27-2010

After looking at my gateway it does not appear to be registering with the MeetingPlace server.