Configure Pix 501 with windows 7

Unanswered Question
Sep 27th, 2010

Im trying to console into a pix 501 with a usb to serial adapter cable in windows 7.  I have tried hyperterminal, securecrt, and teraterm but i just get to a blinking cursor and no further.  is there something im missing?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vickyleach1 Mon, 09/27/2010 - 08:53

- Download Putty.exe(Its the best )

Got to device manager in Windows and find what COM port the USB device is using (mine tends to favor either COM5 or COM6)


- Open Putty.exe

- Select the Serial radio button

- Type in COMx (x being the number)

- Click connect

Hope that fixes the issue

wigdaddy72 Mon, 09/27/2010 - 08:57

Ya, I have tried putty too, and It just does nothing.  When I

select the serial button and put in the correct COMx number and hit open it just doesnt do anything

wigdaddy72 Mon, 09/27/2010 - 09:00

By the way I have tried this on a windows 7 laptop and a windows 7 desktop same issue.  Tried on a windows xp works fine

wigdaddy72 Mon, 09/27/2010 - 09:28

I got this working finally, strangely enough the power cord was bad.  Thanks for your suggestion

Actions

This Discussion