I am not using auto registration and at this stage iam not using partitions.

the phones are registered but iam not sure why is this happining. is there any thing related to media resources (note that iam using same region for device pools and thus same codec

regards,

Ibrahim

Hi Ibrahim,

When the call fails do you get a fast busy, or call can not be completed as dialed?

While the devices are in different device pools, what is the region setting between them, what codec are they defined to talk in? what are the media resources in their MRGL's?

Regards

Kunal

Hi,

iam geting fast busy.

iam using same region to both device pools with codec G711.

for the MRG iam using the following:

note:

10.70.80.111 (publisher server): i am not including the ANN, MTP, MOH and CFB for any MRG for this server

10.65.15.22: first subscriber server in site A

10.65.15.21: second subscriber server in site A

10.128.60.20: subscriber server in site B

HQ MRG:

ANN_3

ANN_4

CFB_3

CFB_4

MOH_3

MOH_4

MTP_3

MTP4

K10 MRG:

ANN_3

ANN_5

CFB_3

CFB_5

MOH_3

MOH_5

MTP_3

MTP_5

The phones in Site A are using MRGL having HQ MRG as member and phones in Site B are using MRGL having K10 MRG as member

Hi Ibrahim.

Looks like a media negotiation issue..

What is the MRGL being used on the NCB HQ DP  and on the NCB K10 DP, is it the same?

Or is the MRGL being used on the device level, are the MRGL's on the phone the same?

With out the call manager trace its giong to be very hard to say why its failing..

Set the traces to detailed on all the nodes and grab a trace for the bad call.

fillow the link below to collect call manager traces:

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml

Mention the calling, called party numbers, with the MAC address of the phones.

Regards

Kunal

Hi Kunal,

iam not putting any MRGL under DP. iam putting it under the phone settings only (phones in site A using HQ MRGL and phones in site B using K10 MRGL.

i also did a test where i put site A phone and site B phone on the same MRGL and i reset the phones but still not working.

regards,

Ibrahim Chehouri

Hi Ibrahim,

PLease collect call manager traces and post them with the right information, i il have a look why it fails.

Regards

Kunal

Hi,

i do not know what happened (maybe the reseting of DP), the calls are working now.

any way thanks for the support.

regards,

Ibrahim Chehouri

Cool,

anytime!

Thanks for keeping us posted

tc

kunal