H.323 and MGCP gateway

Answered Question
Sep 28th, 2010
User Badges:

Dears,

Greetings , i asked if can deploy H.323 protocol and MGCP protocol in the same gateway using AS5350XM or AS5400XM Voice gateways and 1 TFTP server and 5 call managers 7.1 .


Regards.

Correct Answer by paolo bevilacqua about 6 years 7 months ago

AS5xxx does not have FXO.


MGCP is an inferior protocol, to be avoided whenever possible.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
paolo bevilacqua Tue, 09/28/2010 - 05:55
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You should only use H.323 for best results.

RAMI ABDALLAH K... Tue, 09/28/2010 - 06:26
User Badges:

Thanks Paolo , the customer request to deploye H.323 for PSTN  Line and MGCP for FXO "tellular" connection , i dont know order new VGateway or if it available to reduce tender cost  deploye both protocols in the same gateway .


thank you for your response

Correct Answer
paolo bevilacqua Tue, 09/28/2010 - 11:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

AS5xxx does not have FXO.


MGCP is an inferior protocol, to be avoided whenever possible.

husali Wed, 09/29/2010 - 03:54
User Badges:
  • Cisco Employee,

With MGCP you are relying on CUCM for call routing and control logic. H323 is all native to the GW.

Actions

This Discussion