09-28-2010 09:45 AM
Hello Everyone,
i follow this procedure to configure VPN for access internet through ASA : http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml
VPN client connected with ASA and can access all inside and wan resource with no_nat. So i want VPN client can access internet through ASA with above procedure configuration, so client can not access to the internet. Subnet for VPN is 10.50.21.0/24
Attached is my configuration.Pls help me to resolve this problem.Thanks for your support time.
09-28-2010 10:34 AM
Hi
Please confirm that you have configured the
same-security-traffic permit intra-interface |
If this has been configured then :
* Check for the xlate entry for the specific client IP address to see if the translations are being hit.
* Also post any logs or captures that you may have collected at the time of internet access.
Regards,
Sindhuja V
09-28-2010 09:56 PM
09-28-2010 10:13 PM
Hi,
Please change the following in the running config :
FROM :
nat (outside_internet) 1 10.50.21.0 255.255.255.255 dns
TO:
nat (outside_internet) 1 10.50.21.0 255.255.255.0 dns
I hope this helps
Thanks,
Namit
09-28-2010 10:40 PM
Hello,
You right, i have fix it and it ok,thanks for your time.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide