Cannot complete Conference Cisco CME

Unanswered Question
Sep 29th, 2010

Hello I'm getting the error "cannot complete conference" on my Cisco phones. This started after I configured the Meet-Me feature in my CME. I thought I was out of resources so I added a new PVDM2-16 only for Meet-me. I know the problem is a configuration parameter but can't get it to work.

Here's the config parameters:

!
voice class custom-cptone leaving-tone
dualtone conference
  frequency 900 900
  cadence 150 50 150 50
!
voice class custom-cptone joining-tone
dualtone conference
  frequency 1000 1000
  cadence 150 50 150 50
!
sccp local GigabitEthernet0/1
sccp ccm 172.29.21.2 identifier 1 priority 1 version 7.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register xcoder
associate profile 2 register CCconf
!        
dspfarm profile 1 transcode 
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
maximum sessions 8
associate application SCCP
!
dspfarm profile 2 conference 
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
conference-join custom-cptone joining-tone
associate application SCCP
!
!
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 4
sdspfarm tag 1 xcoder
sdspfarm tag 2 CCconf
conference hardware
max-ephones 100
max-dn 100
ip source-address 172.29.21.2 port 2000
max-redirect 11
url services http://172.29.21.25/voiceview/common/login.do
url authentication http://172.29.21.25/voiceview/authentication/authenticate.do 
load 7910 P00405000700
load 7960-7940 P0030702T023
load 7941 SCCP41.8-4-2S.loads
load 7945 SCCP45.8-4-2S.loads
time-zone 12
voicemail 7953
max-conferences 8 gain -6
call-forward pattern .T
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
after-hours day Mon 00:00 23:59
after-hours day Tue 00:00 23:59
after-hours day Wed 00:00 23:59
after-hours day Thu 00:00 23:59
after-hours day Fri 00:00 23:59
after-hours override-code 1630
create cnf-files version-stamp 7960 Aug 25 2009 14:14:08
!

show dspfarm all


Dspfarm Profile Configuration

Profile ID = 1, Service = TRANSCODING, Resource ID = 1 
Profile Description : 
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP   Status : ASSOCIATED
Resource Provider : FLEX_DSPRM   Status : UP
Number of Resource Configured : 8
Number of Resource Available : 8
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Codec : g729r8, Maximum Packetization Period : 60
Dspfarm Profile Configuration

Profile ID = 2, Service = CONFERENCING, Resource ID = 2 
Profile Description : 
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP   Status : ASSOCIATED
Resource Provider : FLEX_DSPRM   Status : UP
Number of Resource Configured : 6
Number of Resource Available : 6
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required
!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jbaraona Wed, 09/29/2010 - 09:06

Here is the DNs config:

!
ephone-dn  80  dual-line
number 3399 secondary 12142722899
conference meetme
no huntstop
!
!
ephone-dn  81  dual-line
number 3399 secondary 12142722899
conference meetme
preference 1
no huntstop
!
!
ephone-dn  82  dual-line
number 3399 secondary 12142722899
conference meetme
preference 2
no huntstop
!
!
ephone-dn  83  dual-line
number 3399 secondary 12142722899
conference meetme
preference 3
no huntstop
!

Actions

This Discussion