Configure a Cisco 891 with a WorldWidePackets Lightning Edge at each end of a National Ethernet connection

Unanswered Question
Sep 29th, 2010
User Badges:

I have to install 2 Cisco 891's, one at each end of a 'National Ethernet' connection provided by Virgin.

They have provided 2 WorldWidePackets Lightning Edge 46's, one at each end with a fibre link in the back and 4 ethernet ports in the front.

I need to configure the Cisco 891's to link the 2 sites together but also allow for internet access via a currently installed draytek router.

I believe that I need to configure the LAN port on the site's subnet and the WAN ports can be anything aslong as they are both on the same subnet (ie and

What would I need to do regarding routes?

Any help would be hugely appreciated.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
riroe Mon, 10/04/2010 - 03:31
User Badges:

Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here:;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.



This Discussion

Related Content