Configure a Cisco 891 with a WorldWidePackets Lightning Edge at each end of a National Ethernet conn...

Andrew Duffield · ‎09-29-2010

I have to install 2 Cisco 891's, one at each end of a 'National Ethernet' connection provided by Virgin.

http://www.virginmediabusiness.co.uk/products__solutions/site_to_site_connectivity/national_ethernet.aspx

They have provided 2 WorldWidePackets Lightning Edge 46's, one at each end with a fibre link in the back and 4 ethernet ports in the front.

I need to configure the Cisco 891's to link the 2 sites together but also allow for internet access via a currently installed draytek router.

I believe that I need to configure the LAN port on the site's subnet and the WAN ports can be anything aslong as they are both on the same subnet (ie 10.10.10.1 and 10.10.10.2).

What would I need to do regarding routes?

Any help would be hugely appreciated.

Thanks

Andy

riroe · ‎10-04-2010

Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here:

http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.

THANKS

Configure a Cisco 891 with a WorldWidePackets Lightning Edge at each end of a National Ethernet connection