PRIMARY SECONDARY TERTIARY WLC 5508 6.0.196

Unanswered Question
Sep 30th, 2010

Hi,

i have a problem on the high disponibility. In fact my LAP 1242 connect the cisco-capwap-controller.localdomain for the first time but after it don't respect my primary registred on HIGH DISPONIBILITY.

Do you have an idea?

Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Serge Yasmine Tue, 10/05/2010 - 04:04

Hi, you need to make sure that the primary WLC that you have configured on the AP is in fact replying to the discovery request

of the AP.

If the AP receives a discovery request from the WLC that is configured as a Primary then it will join it.

Some of the reasons for the AP no to join the primary are:

1- Wrong WLC name on the AP configuration

2- WLC doesn't reply to the discovery request of the AP

3- WLC is already full

4- AP is not getting authorized on the WLC and Authorization have been enabled for the APs on the WLC.

5- ....

Hope this helps

Serge

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode