09-30-2010 08:54 AM - last edited on 03-25-2019 08:02 PM by ciscomoderator
Would anybody know if cisco has a link to a cable pin-out for the following?
We have cisco WS-SVC-CMM Cat6k Voice Linecard that has RJ48c and at the other end is a male DB15 connector. Our PRI isn't working at the moment and we are suspecting it's the cable. We want to change the cable but I need to make sure of the pin-out before.
Thanks,
J
Solved! Go to Solution.
09-30-2010 09:19 AM
This is revealed by a simple search:
http://www.cisco.com/en/US/docs/routers/access/hardware/notes/marcabl.html#wp37818
09-30-2010 09:19 AM
This is revealed by a simple search:
http://www.cisco.com/en/US/docs/routers/access/hardware/notes/marcabl.html#wp37818
09-30-2010 11:03 AM
Thanks....I guess my search words weren't that good.
That link proved to be very useful.
03-01-2017 06:57 PM
http://www.infinitecables.com/telco-phone-ds3-t1-cables/t1-cables/t1-shielded-rj45-to-db15-male-straight-through/3ft-t1-straight-through-rj48c-to-db15-male-2pr-100ohm-grey/
03-01-2017 06:56 PM
http://www.infinitecables.com/telco-phone-ds3-t1-cables/t1-cables/t1-shielded-rj45-to-db15-male-straight-through/3ft-t1-straight-through-rj48c-to-db15-male-2pr-100ohm-grey/
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: