ehwic on cisco 2811

Answered Question
Oct 1st, 2010
User Badges:

Hello Expert,


Can ehwic be use on cisco 2811?


I know this can be use on cisco 2901 routers


Regards

Jomo

Correct Answer by krahmani323 about 6 years 9 months ago

Hello Jomo,


Not expert but I will try to answer :


1/ From this page  http://www.cisco.com/en/US/prod/collateral/modules/ps5949/qa_c67-612908.html


Q. Are there any restrictions or considerations I should be aware of?
A Yes, Following is a summary of a few limitations when using the EHWIC switch:

• The EHWIC switch is not supported on older ISR platforms (Cisco 1841 and Cisco 2800 and 3800 Series).

############""

2/ http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/geSwitchEhwic_hw.pdf says :


Cheers!

Karim

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
krahmani323 Fri, 10/01/2010 - 10:37
User Badges:
  • Silver, 250 points or more

Hello Jomo,


Not expert but I will try to answer :


1/ From this page  http://www.cisco.com/en/US/prod/collateral/modules/ps5949/qa_c67-612908.html


Q. Are there any restrictions or considerations I should be aware of?
A Yes, Following is a summary of a few limitations when using the EHWIC switch:

• The EHWIC switch is not supported on older ISR platforms (Cisco 1841 and Cisco 2800 and 3800 Series).

############""

2/ http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/geSwitchEhwic_hw.pdf says :


Cheers!

Karim

Actions

This Discussion