Forward all incoming calls from specific country to specific extension

Answered Question
Oct 1st, 2010
User Badges:

Hello,


Using CME 4.1, IOS 12.4(15)T9. Cisco 3825.


How do I route all incoming calls from a certain country to a certain single extension number? Is it even possible?


Can I use the answer-address command together with a destination-pattern command under a inbound dial-peer to accomplish this? I've read the documentation about answer-address, but I don't know if I understand it.


Thanks in advance.


Grant

Correct Answer by paolo bevilacqua about 6 years 9 months ago

Yes, you need to use answer-address on a DP on which a translation-profile incoming that sets the desired destination.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
Correct Answer
paolo bevilacqua Sat, 10/02/2010 - 02:18
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes, you need to use answer-address on a DP on which a translation-profile incoming that sets the desired destination.

Grant Bagdasarian Sat, 10/02/2010 - 05:05
User Badges:

Thank you.


Something like this? +31 is the country code for the Netherlands.



translation-rule 1

rule 1 /316xxxxxxxx/ /765xxxxxx/


translation-profile TEST

translate calling 1


dial-peer voice 1000

answer-address 31T

translation-profile incoming TEST

paolo bevilacqua Sat, 10/02/2010 - 05:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes, but you need to translate the called number, not calling.

Udit Mehrotra Sun, 10/03/2010 - 16:18
User Badges:
  • Cisco Employee,

I will like to add my two cents to Paulo's comment:


If any dial-peer on the incoming call leg is configured with "incoming called-number ." answer address based inbound dial-peer matchiing will fail since incoming called-number scores above answer-address. So remember that you remove any incoming called-number command on inbouund call leg.

Actions

This Discussion