10-03-2010 06:34 AM - edited 03-11-2019 11:49 AM
Hi,
We have an issue with timeout values not working Version 8.2(3) and Version 8.3(2)
timeout conn 0:30:00 half-closed 0:10:00 udp 0:01:00 icmp 0:00:02
10-03-2010 08:18 AM
Hi John,
Can you post the output of the following commands:
'show run class-map'
'show run policy-map'
'show run service-policy'
'show run sysopt'
'show run flow-export'
We would want to check if you have any custom timeouts configured via MPF. Also, there is a bug with a combination of sysopt and flow-export commands that hold connections open forever. The above output would help us rule out both of these.
-Mike
10-04-2010 12:39 PM
Thanks Mike.
aasa# show run class-map
!
class-map defaut
class-map global-class
match default-inspection-traffic
class-map type inspect http match-all asdm_high_security_methods
match not request method head
match not request method get
class-map outside-class
match access-list outside_mpc
!
10-04-2010 12:56 PM
Hi John,
This seems to be a bug, so I would recommend opening up a TAC case so it can be investigated.
-Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide