Can the UCS540 work with 2N helios IP 1 Button Door Entry keypad?

Unanswered Question
Oct 3rd, 2010

Hi I have the following queries :

1. Will the 2N helios IP 1 Button Door entry keypad work with the UCS540W ? The protocol used by the 2N Helios is SIP. Pls see below the specs:

VOIP: Signalization : SIP

Number of Voice Channels : 2

Audio Codc : G711 PCM, 64Kbps

Video Codec : H264, 64-2048 kbits

Interfaces:

Ethernet 10/100 Base T

Relay Outputs : Max Voltage 30V DC, Maximal current 1 A DC

2. Are there any compatible Door entry systems that have been tested with Cisco UCS ?

3. Will the Sony SNC-DS10 network mini-dome IP camera work with the SPA525G IP Phone for streaming live video ? The Sony camera supports JPEG & MPEG-4 video formats.

Thanks & rgds

Bob Sindhu

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Hornstein Sun, 10/03/2010 - 23:02

Hi Bob,

We have played with a few key door openers  before.  check out a rather excellent posting and Application note  by Marcos Hernandez on the cyberdata intercom and door opener

https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=cyberdata+

VOIPon  who make your product, suggest that their product is compatable with the following;

  • Cisco Call Manager
  • Linksys

The is referenced from the following URL;

http://www.voipon.co.uk/2n-helios-ip-1-button-keypad-cam-door-entry-panel-9137111cke-p-1487.html

I did run a SIP based cyberdata product on my UC520.  The script below dynamically accepts a SIP client with a MAC address of 0020.F7D8.D008 to make and receive SIP calls.   This part I have tested myself.

My script below taken from my UC520 was basically  plagiarized from Marcos'  Application note referenced above.

voice register global

mode cme

source-address 10.1.1.1 port 5060

max-dn 10

max-pool 10

file text

create profile sync 0115325858050421

!

voice register dn  1

number 801

no-reg

!

voice register template 1

anonymous block

!

voice register pool  1

id mac 0020.F7D8.D008

number 1 dn 1

dtmf-relay rtp-nte

voice-class codec 1

no vad

I have answered your question on the Sony Camera on a previous posting you made.

regards Dave

epasqualotto Tue, 11/02/2010 - 15:43

Hi Bob, I'm working also on it. Unfortunately you have to wait the release 8.5 (this month) or maybe 8.6 (march 2010) for have SIP video endpoint on Cisco CME. I'm waiting for the same stuff because I write a dedicated softphone for it (http://videospindoor.netspin.it)

Enrico Pasqualotto

Actions

This Discussion