×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

LMS4 Roll out of VRF's across a network.

Unanswered Question
Oct 18th, 2010
User Badges:

Is it possible with LMS 4 to roll out a VRF across several devices taking into account the unique RD value per device. I would like to use the loopback of the device that is having the config pushed to as the unique value i.e


loopback0

ip address 1.1.1.1 255.255.255.255


ip vrf name

rd 1.1.1.1:11 < RD containing unique value per device

route-target export 123:11

route-target import 123:11

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 10/19/2010 - 21:30
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The Virtual Network Manager component of LMS will want to use a common RD for all devices assigned to a VRF.  However, there are other deployment options.  You could use Netconfig with a parameterized user-defined template to deploy a VRF to a set of devices, using a unique RD for each device.  However, you will not be able to automatically assign the Loopback IP as the RD prefix.  You would need to manually do that in the Netconfig parameter file.


More about Netconfig user-defined templates (and how to create parameter files) can be found under Configuration > Tools > NetConfig > User Defined Tasks.

Actions

This Discussion