×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Failover on 2 ASA 5505 ?

Unanswered Question

Hello All,


I am recently purchased 2 Cisco 5505 ASA for my network. I am having 2 ISP Connections. I want to connect these 2 connections to the 2 ASA's. Means ISP 1 to ASA 1 & ISP 2 to ASA 2.


I want to do failover on this network. I dont have router in network. ISP Links are directly connected to ASA.


Is Failover possible on 2 ASA without Router ?


If so Then Please tell me how to do that ?


Thanks...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jitendriya Athavale Mon, 10/25/2010 - 21:31
User Badges:
  • Cisco Employee,

hi vinayak


well failover of asa means using asa for high availability, from what i understand i think you are looking forward for failover or isp links


this is what you can do


use the asa is failover for high availability and use configure sla monitoing on them for isp link high availability


http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml




if you want to use separate asa for separate isp then you will need a router in between

Jitendriya Athavale Mon, 10/25/2010 - 21:44
User Badges:
  • Cisco Employee,

no unfortunately there isnt


as i mentioned before the only way out is to do sla monitoring and if you want you can use asa in failover (but this will be only for device and not isp)

Actions

This Discussion