Design of wireless solutions with WLC 5508

Unanswered Question

There is a recommendation by Cisco of the minimum number of gigabit ports, which is to be installed by the amount of AP associated with a controller 5508, for 150 AP is associated with a driver, you must install at least 3 gigabit ports?

Please, we need this information to design a solution.

Best regards.

Giovanni Anfossi

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Tiago Antunes Wed, 10/27/2010 - 01:41
User Badges:
  • Cisco Employee,


From the config guide Cisco 5500 series controllers have no  restrictions on the number of access points per port, but Cisco  recommends using LAG or multiple AP-manager interfaces on each Gigabit  Ethernet port to automatically balance the load:




If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.


This Discussion



Trending Topics - Security & Network