Design of wireless solutions with WLC 5508

ganfossi · ‎10-26-2010

There is a recommendation by Cisco of the minimum number of gigabit ports, which is to be installed by the amount of AP associated with a controller 5508, for 150 AP is associated with a driver, you must install at least 3 gigabit ports?

Please, we need this information to design a solution.

Best regards.

Giovanni Anfossi

Tiago Antunes · ‎10-27-2010

Hi,

From the config guide Cisco 5500 series controllers have no restrictions on the number of access points per port, but Cisco recommends using LAG or multiple AP-manager interfaces on each Gigabit Ethernet port to automatically balance the load:

http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mint.html#wp1277659.

HTH,

Tiago

--

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

ganfossi · ‎10-27-2010

Thanks, this information help I need.