×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Problems in a 4400 controller

Unanswered Question
Oct 29th, 2010
User Badges:

Hi,


I have received some logs in 4404 with  version controller 5.2.193 ...

The logs are:

%RRM-3-RRM_LOGMSG: rrmLrad.c:2471 RRM LOG:

%APF-3-SITE_NULL_WLAN: apf_site_override.c:1556 Invalid value 0 for  WLAN

%APF-3-INVALID_RADIO_TYPE: apf_api.c:26338 Invalid radio type 255  received.

*%APF-3-INVALID_RADIO_TYPE: apf_api.c:26351 Invalid radio type 255  received.


I know they mean or you can give some clue about them.


Thank you very much for everything
Greetings

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Raul Manzano Barroso Fri, 10/29/2010 - 02:11
User Badges:

What model of AP is trying to register??? It seems that this code version not support an access point.


Maybe with a more complex log in the controller side we canm help us more efficiently 


Best Regards.

Danimarcos Fri, 10/29/2010 - 02:26
User Badges:

Good to see you here Raul,

The problem we have in the SOL station to see if we can help, APs 1242,there interfecerencias in the PCL with a Bluetooth antenna, when they are on the phone is choppy, and if you turn off the phone Bluetooth works well. .

The logs that I have are these from controller

Thank you very much

Raul Manzano Barroso Fri, 10/29/2010 - 03:05
User Badges:

Hi dani.


RRM messages and Invalid type radio messages seem to show that the Ap´s detect this interferences but, as they can´t know the source (is not an 802.11 signal) probably they can´t catalog these interferences and show this log.


Probably, when you can see these logs in WLC, if you see the interference and noise profiles of each AP´s affected they are violated.


Best Regards.

Nicolas Darchis Sat, 10/30/2010 - 04:05
User Badges:
  • Cisco Employee,

%APF-3-INVALID_RADIO_TYPE: apf_api.c:26338 Invalid radio type 255  received.

*%APF-3-INVALID_RADIO_TYPE: apf_api.c:26351 Invalid radio type 255  received.



This can point to an AP either having an invalid radio or having a radio dead. It basically happens when the WLC is unable to read the radio information from the AP.

So check for a down radio in your APs :-)


Nicolas

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode