×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VIC3-4FXS/DID - Inbound not working

Unanswered Question
Nov 14th, 2010
User Badges:

Outbound works great.


Inbound - not at all.


UC 560 - SP 8.0.2 (15.0(1)XA2)


I used GUI which populated this:



voice-port 0/2/1

station-id name xxx6503238

station-id number 3238

caller-id enable


I added this:



dial-peer voice 151 pots

description Acctg Fax

destination-pattern 3238

port 0/2/1

no sip-register


I watch the inbound call come in on PRI, but it disconnects.


Suggestions?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nathan Compton Mon, 11/15/2010 - 08:50
User Badges:
  • Silver, 250 points or more

If you call it internally does it work with cisco phone does it work?

Joseph Chambers Mon, 11/15/2010 - 17:50
User Badges:

I swapped the faxes to the onboard FXS, which didn't help.


I noticed inbound calls to phones didn't work either.


I set up the inbound translation pattern for DID 3200 - 3239 and that fixed the problem, which includes the faxes, but at that point they were on the onboard FXS so don't know if that would have fixed the VIC3 issue or not.

Actions

This Discussion

Related Content