Unable to log into SA540 as any user

Unanswered Question
Nov 15th, 2010
User Badges:

This is the 2nd time that this has happened. I am unable to log in my SA540 as any user including the Admin either through the SSL VPN portal or directly connected to the box. The fix is to reboot the device and it starts working but I as I am not on-site all the time, this is a problem. I recently upgraded the firmware to 1.1.65.

Has anyone else experienced this issue and if so, how can it be resolved?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
sigolaper Tue, 11/16/2010 - 11:04
User Badges:

I have seen this on a SA520W with the same firmware, but don't know any better fix than you -> reboot.

weilia Mon, 11/22/2010 - 14:55
User Badges:
  • Cisco Employee,

Hi Mark,

Could you check your logging configuration ? If they are enabled,

please disable them for now, see if the issue still exists.




This Discussion