11-17-2010 04:25 AM - edited 03-19-2019 01:55 AM
HI,
i'm using CLICK TO CALL to dial numbers from web page.
I read numbers from a db but they haven't zero for external calls and i can't modify the db so i asky you:
Can I post to clickToDIal application a param (0) to add to number for external call?
thanks
Solved! Go to Solution.
11-18-2010 05:16 AM
Indeed application dial rules is what you can use. It is explained here:
http://tools.cisco.com/squish/56877
You can also disable dial rules and configure fixed values as outlined here:
11-17-2010 04:48 AM
Yes. Configure Application Dial Rules and CUCM will modify the number before dialing it. Also do not forget to enable the Apply Application Dial Rules on SOAP Dial Request service parameter on the WebDialer service.
11-18-2010 05:16 AM
Indeed application dial rules is what you can use. It is explained here:
http://tools.cisco.com/squish/56877
You can also disable dial rules and configure fixed values as outlined here:
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: