×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RV042 Broadcast Issue

Unanswered Question
Nov 17th, 2010
User Badges:

Hi,

I need some help with RV042 router to allow broadcast to pass through.

I have tried simple scenario. Router is in "Router" mode. Firewall is disabled. Multicast pass through is enabled.

DHCP server in router is disabled. All IP addresses are configured manyally as static.


PC1(192.168.3.10) connected to WAN(192.168.3.20) of router and PC2(192.168.4.10) connected to LAN1(192.168.4.1) of router.


When i trying to ping then both computers are seeing each other. Traceroute also shows 2 hops in both direction.

But when i start Broadcast listener in one computer (for example in PC2 on port 50000) and then send some data to same port and lan-broadcast address(192.168.4.255:50000) from second computer(PC1) then PC2 received nothng . I have tried the same in opposite direction, but it doesn't work either.


Any suggestion?

Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion