11-24-2010 12:28 AM - edited 03-03-2019 06:08 AM
Unfortunately one of my 871 have a problem with configuration.
I can get to him only by AUX.
It runs only with default configuration.
When I want to copy my config to startup i received information:
NV: InvalidPointer value(1884) in privateconfiguration structure
%sys-4-nv_Block_initfall: Unable to initialize the geometry of nvram
11-24-2010 12:57 AM
Hi,
i found a similar Bug CSCtg46773. Please try the workaround:-
++++++++++++++
'write erase' 'copy run start'
+++++++++++++
Bug details:-
Errors: NV: Invalid Pointer value(6128) in private configuration structure %SYS-4-NV_BLOCK_INITFAIL: Unable to initialize the geometry of nvram Conditions: If the running-config and startup-config were noticed to be not the same size (dir all) and the unit was rebooted several times during the flash boot process, the router would prompt for the startup script and the NVRAM would be corrupted. At that point there would be no startup-config. Workaround: write erase is a workaround
++++++++++++++++++++++++++++
thanks,
Vinay
_________
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
11-24-2010 01:05 AM
Unfortunately : No such site
11-24-2010 01:11 AM
Bug tool kit on Cisco.com will provide you more info on this Bug
11-24-2010 01:21 AM
My login is not entitled to use Bug Toolkit.
11-24-2010 01:25 AM
i have copied the content of the bug in the previous reply. Please try the workaround.
thanks,
Vinay
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide