Hello,
I have problems with VPN connection between RV042 and iOS4.2 devices (iPad/iPhone).
First question is "is it possible at all"
Second question is "how"
--
I have configured Group tunnel and created User for VPN. QuickVPN in my Windows XP-laptop seems to work fine.
But when I try to connect with iPhone or iPad (3G) I will get message like "Server is not responding".
From RV042 log I found following lines:
| Dec 10 13:09:29 2010 | VPN Log | Initial Aggressive Mode message from [iOS_device_public_IP] but no (wildcard) connection has been configured |
| Dec 10 13:09:29 2010 | VPN Log | [Tunnel Negotiation Info] <<< Responder Received Aggressive Mode 1st packet |
| Dec 10 13:09:29 2010 | VPN Log | Received Vendor ID payload Type = [Dead Peer Detection] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload Type = [Cisco-Unity] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload Type = [XAUTH] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-02_n] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-02] |
| Dec 10 13:09:29 2010 | VPN Log | Received Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-03] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [9909b64eed937c65...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [80d0bb3def54565e...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [4d1e0e136deafa34...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [439b59f8ba676c4c...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [8f8d83826d246b6f...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [4df37928e9fc4fd1...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [4a131c8107035845...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [4a131c8107035845...] |
| Dec 10 13:09:29 2010 | VPN Log | Ignoring Vendor ID payload [4a131c8107035845...] |
Any ideas what is wrong?
