cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1913
Views
0
Helpful
3
Replies

site to site vpn between uc540 and sr520w?

lbroering
Level 1
Level 1

We have a customer that will be deploying a uc540 at his main office and will be using a T1 line from Bandwidth.com for both his voice(sip trunk) and internet. We were going to connect the uc540 directly to Bandwidth's router. There will be one staff member working out of their remote office. We are required to set up a site to site vpn between the main office and the remote office. The remote office will have a Cisco phone that needs to be an extension on the uc540 and they will also be transferring files between offices. Is this supported now? Is it supported in cca? It seems like all of the documentation show an additional sr520 at the main office for one vpn endpoint. I would just like to use the uc540 for the vpn endpoint.

1 Accepted Solution

Accepted Solutions

Steven DiStefano
VIP Alumni
VIP Alumni

SR520 FE and ADSL for remote teleworker router is supported, yes.  With CCA 3.0 too.

http://www.cisco.com/web/partners/sell/smb/tools_and_resources/smart_business_comm_system.html

View solution in original post

3 Replies 3

Steven DiStefano
VIP Alumni
VIP Alumni

SR520 FE and ADSL for remote teleworker router is supported, yes.  With CCA 3.0 too.

http://www.cisco.com/web/partners/sell/smb/tools_and_resources/smart_business_comm_system.html

Thanks. That was exactly what I was looking for.

Also check this one out.   It has CCA 3.0 screens and does highlight a workaround you need to know about.

https://supportforums.cisco.com/docs/DOC-15031

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: