02-18-2011 12:34 AM
Hi I was using WebVPN (clientless) with SSO on Exchange OWA 2003 and it was working fine with those SSO POST parameters:
URL: https://<mailserver>/exchweb/bin/auth/owaauth.dll
destination https://<mailserver>/exchange/
flags 0
username DOMAIN\CSCO_WEBVPN_USERNAME
password CSCO_WEBVPN_PASSWORD
SubmitCreds Log+On
forcedownlevel 0
trusted 0
Now, I'm trying to do the same with OWA 2010 and it doesn't work. I always receive an error about user credentials
For Exchange 2010, I use those parameters:
URL: https://<mailserver>/owa/auth.owa
destination https://<mailserver>/owa/
flags 0
username DOMAIN\CSCO_WEBVPN_USERNAME
password CSCO_WEBVPN_PASSWORD
SubmitCreds Log+On
forcedownlevel 0
trusted 0
Does anyone know how to fix?
Has anyone got it working?
Any help?
Thanks
Solved! Go to Solution.
03-04-2011 01:41 PM
In this setup, I had to change it to HTTP (customer related). It works over HTTPS as well.
Get this tool http://www.fiddler2.com/fiddler2/.
URL: http://internal-mail-server-ip/owa/auth/owaauth.dll
post-parameter:
destination: http://internal-mail-server-ip/owa/
flags: 0
forcedownlevel: 0
trusted: 0
username: CSCO_WEBVPN_USERNAME
password: CSCO_WEBVPN_PASSWORD
isUtf8: 1
Greets,
Norbert
Hope this help....please rate if helpful
02-28-2011 12:04 PM
Hi,
Have you tried "http capture"?
Here is my "Workaround" bookmark. I'll post the final bookmark (when I'm back in the office).....
http://
destination: http://
flags: 0
forcedownloadlevel: 0
trusted: 0
username: CSCO_WEBVPN_USERNAME
password: CSCO_WEBVPN_PASSWORD
isUft8: 1
BUT, the weird think is, when I hit the bookmark, the OWA (2010) login screen appears.
After klicking (once) on the "sign in" button on the OWA login page, go back to the WebVPN portal and click a second time on the bookmark the
access to the mailbox account is granted.
The same with the post-plugin.
Greets,
Norbert
03-04-2011 03:37 AM
it doesn't work for me. Incorrect credentials
http capture? how can i do that? does it works with https?
thanks
03-04-2011 01:41 PM
In this setup, I had to change it to HTTP (customer related). It works over HTTPS as well.
Get this tool http://www.fiddler2.com/fiddler2/.
URL: http://internal-mail-server-ip/owa/auth/owaauth.dll
post-parameter:
destination: http://internal-mail-server-ip/owa/
flags: 0
forcedownlevel: 0
trusted: 0
username: CSCO_WEBVPN_USERNAME
password: CSCO_WEBVPN_PASSWORD
isUtf8: 1
Greets,
Norbert
Hope this help....please rate if helpful
03-07-2011 12:45 AM
Great!
This parameters works for me, too (and with https)
Thank you very much
10-28-2011 03:05 AM
Hi!
Where can i set these parameter setting suggested? I´m using ASA5510 Version 8.4(1) and the post options i have in drop-down list is:
CSCO_WEBVPN_USERNAME
CSCO_WEBVPN_PASSWORD
Is this done via cli? If so how should i enter config mode for a specific bookmark and entry?
Regards,
Fredrik
10-28-2011 12:01 PM
Hi there,
See
under chapter "Configuring Post Parameters for SSO with Outlook Web Access".
Edit Bookmark, Advanced Options...
HTH,
Norbert
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: