cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2919
Views
0
Helpful
4
Replies

Codec C Series - Dual Display Option

pvasquesc
Level 1
Level 1

Hi Community,

In the Codec C Series, is possible to connect 2 LCDs simultaneous without dual display licence?

I just need to project the conference in both LCD's.

Best Regards,

Pedro Vasques

4 Replies 4

Anthony Thomson
Level 3
Level 3

I just tried it on my C20; the second HDMI port is not active (I don't have the DD option).  Doesn't matter if I have xconf video monitors set to single/dual or dualpresentationonly.  This doesn't surprise me at all; why would they have an optionkey for it if it worked by default? 

(Of course, if you always want the same display in two places, just use a HDMI video splitter).

thobonho
Level 1
Level 1

Hi,

In additional to the previous answer, both video ouptuts available on the C40 are enabled by default from software version TC4.x. Without the Dual Display option, you'll get the same content on both screens as desired.

Hi All,

Thanks for the information.

Now, my doubt is clear enlightened.

Pedro Vasques

marrachart
Level 1
Level 1

On any device, you could always add a HDMI splitter with 1 input and 2 (or more) outputs.

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: