cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
614
Views
0
Helpful
2
Replies

Does LAP 1250 support Mesh.

Dear experts!

I see that Cisco LAP 1240 support Mesh mode, but I am not sure if LAP 1250 support or not? I can't find any document that say about this.

Best Regards!

1 Accepted Solution

Accepted Solutions

Surendra BG
Cisco Employee
Cisco Employee

Hi,

Depends on the WLC software that you are using!! if you are running the latest 7.0.116 then the Indoor mesh is supported using 1250 series APs..

With the 7.0.116.0 release, the mesh functionality is added in the Cisco  Aironet 1040, 1140, 1250, 1260, 1520, and 3500 series indoor access  points. The mesh backhaul radio supports the 802.11n data rate. When  operating in mesh mode, their mesh backhaul will support both the  802.11a and 802.11n data rate.

Lemme know this answered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra

Regards
Surendra BG

View solution in original post

2 Replies 2

Surendra BG
Cisco Employee
Cisco Employee

Hi,

Depends on the WLC software that you are using!! if you are running the latest 7.0.116 then the Indoor mesh is supported using 1250 series APs..

With the 7.0.116.0 release, the mesh functionality is added in the Cisco  Aironet 1040, 1140, 1250, 1260, 1520, and 3500 series indoor access  points. The mesh backhaul radio supports the 802.11n data rate. When  operating in mesh mode, their mesh backhaul will support both the  802.11a and 802.11n data rate.

Lemme know this answered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra

Regards
Surendra BG

Hi Surendra!,

Thanks for your useful information so much

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card