vlan configuration fails from Campus manager

Unanswered Question
Jul 4th, 2011
User Badges:


In our customer network, We have implemented LMS with the following versions.

LMS - ver 3.2.1

Campus Manager - ver 5.2.2

DFM - ver 3.2.1

We are trying to create vlans in switches(3750 E) through Campus manager. The VLAN creation fails. Please suggest any solution to resolve the issue. We are using SNMP v3 with the following SNMP configuration in switches.

snmp ifmib ifindex persist snmp-server group pnunmsgroup v3 auth read PWD write PWD1 access 10
snmp-server group pnunmsgroup v3 priv notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFF.FFFF0F
snmp-server view pnunmsview iso included
snmp-server user pnunmsadmin pnunmsgroup v3 auth md5 PWD2 priv aes 256 PWD3
snmp-server host traps version 3 priv pnunmsadmin
snmp-server trap-source Vlan2000
snmp-server location <Utility tunnel zone 10>
snmp-server contact <Contact_Name+Phone>
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps mac-notification move threshold
snmp-server host version 3 priv pnunmsadmin
snmp ifmib ifindex persist

The device troubleshooting report shows

Reachability Check (Device connected)
       SNMPv1/v2c ReadFailed
       SNMPv1/v2c WriteFailed
       SNMPv3 ReadSuccess
       SNMPv3 WriteFailed


Madhan kumar G

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion

Related Content