×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SPA50XG BLF

Unanswered Question
Jul 11th, 2011
User Badges:

I have a SPA508G, and I have gotten BLF to work great on unused lines, and I am trying to figure out how to set up BLF status on an extension or line in use. What I mean by this is I have an extension set up and in use, and I would like to assighn the status light to a different extension displaying the status of that line, not the one I am on. The admin manual only give instuctions on assighning BLF to unused line buttons on the phone. Any help or ideas would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Patrick Born Tue, 07/12/2011 - 07:08
User Badges:
  • Cisco Employee,

Hi Computer Business,


I don't really follow what you're trying to accomplish. BLF can only be configured on an unused extension of the monitoring phone.


Perhaps the following will be of use to you:

BLF on Asterisk:

   https://supportforums.cisco.com/docs/DOC-9958 [Unused buttons are configured the same way as SPA500S buttons]


BLF on Broadsoft:

   https://supportforums.cisco.com/docs/DOC-9977


Regards,



Patrick

----------

   Patrick Born | Technical Marketing Engineer (TME) – SPA SIP Endpoints
                   Use this reference document to locate SPA phone resources

Actions

This Discussion

Related Content