MAC Filter + WPA Autonomous AP

ricardorojas123 · ‎07-20-2011

I have two wireless networks configured in the AP1200, both SSIDs are configured with WPA.

SSID 01: configured whit WPA

SSID 02: configured whit WPA

I have configured the access-list number 700, and I would like to apply to a single network. Achieving the following:

SSID 01 : WPA + Mac Filter, using the ACL number 700.

SSID 02: WPA

How I can apply the list 700 to the first SSID only ??

Thanks !

Surendra BG · ‎07-20-2011

Hi,

I am not sure if this works!! i wanna try, coz MAC filter is a Global configuration and for radio interface not for SSID.. please try the below and see if this helps..

here is the config

en

conf t

access-list 700 permit XXXXXXX XXXXX

exit

en

conf t

int dot11 0.1

bridge-group 1 input-address-list 700
end

See if this helps!! Lemme know if this helps

Please dont forget to rate the usefull posts!!

Regards
Surendra

Regards
Surendra BG

ricardorojas123 · ‎07-20-2011

ok, I will comment

marc.groenen · ‎04-11-2013

Did you get the ACL working on the specific dot11 subinterface ?

Or does it only work in the global configuration ?

maldehne · ‎04-11-2013

If you have one ssid , accordingly one bridge-group needed you can apply under the global configuration.

---------------------------------------------------------------------

Please make sure to rate correct answers

marc.groenen · ‎04-11-2013

yes but if you have multiple SSID's and you want to block the user using this MAC ACL on 1 SSID but not all the SSID's.

You would need to use the bridgeroup statement:

int dot11 0.1

bridge-group 1 input-address-list 700

But i wanted to know if the command worked out for ricardorojas123 since he said he would comment....

However i have already implemented the config in a testcase and it seems to be working.

Also when using command for the global configuration:

dot11 association mac-list 700

The dot11 interfaces will reset which should be a NOTE in the documentation i guess

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058ed26.shtml#macbasedacls