08-03-2011 03:33 AM - edited 03-01-2019 02:28 PM
Hello,
after upgrade to IOS XR 4.1.1 on ASR9k platform we can not gather snmp info for subinterfaces which are in l2 mode (xconnect end).
Does any one has similar problem ?
08-04-2011 08:17 AM
Zdravo Dragoljub,
could you please let me know which MIBs you are trying to poll, as well as the snmp configuration from the box?
Cheers,
Ivan.
P.S. for your convenience - please use the new XR forum for your future requests!
09-13-2011 09:18 AM
Zdravo Ivane,
i am trying same MIB's like in 4.0.1.
SNMP config is simple :
snmp-server ifindex persist
snmp-server community XXX RO 3
snmp-server community XXX RW 2
snmp-server chassis-id XXX
snmp-server contact XXX
snmp-server location XXX
09-14-2011 02:32 AM
I think this is the same bug as in 4.1.0. Cisco bug id CSCtr88602.
"Polling doesnt return any values against stats supported L2 subintf. The fix is now committed to 4.2.0 but we are working at integrating it into 4.1.2."
/Andreas
06-20-2012 06:25 AM
Hi,
Sorry for the late reply, but we have exactly the same issue with v4.1.1 also are you running Netflow on v4.1.1 as that doesn't seem to work either?
Thanks
Rob
06-20-2012 06:28 AM
I have upgraded to 4.2.0 which has this issue resolved.
We did not use netflow on 4.1.1 but on 4.0.1 which we still have in production works ok.
On 4.2.0 also works fine.
06-20-2012 06:41 AM
Thanks for the speedy response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide