WLC Custom Web Auth Bundle sample .tar file is not on WCS

Jason Aarons · ‎08-17-2011

The WLC documentation would make it appear (or maybe previously) you should download a sample web auth bundle code from the WCS Templates. I was never able to find a sample .tar file on the WCS 7.0.172.0 templates.

However I found on Cisco.com under Support > Downloads > Products >Wireless> Wireless LAN Controller Standalone Controllers> Cisco 5500 Series Wireless Controllers > Cisco 5508 Wireless Controller > Wireless Lan Controller Web Authentication Bundle-1.0.2 > webauth_bundle-1.0.2.zip

It was updated in June 2011, some pretty good sample html code.

The readme.html in the sample webauth_bundle-1.0.2.zip file has been very helpful , almost as good as the suppport community web page on custom web auth.

https://supportforums.cisco.com/docs/DOC-13954

Nicolas Darchis · ‎08-22-2011

WCS config guide 7.0.172 is correct

http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/temp.html#wp1129979

The bundle in WCS is downloaded through :

configure->controller

"select a command"-> download customized webauth bundle.

Just tested it and it was there.

The one on cisco.com is better though

Kayle Miller · ‎08-23-2011

Nicolas is correct is all counts. That is the process in 7.0.172.0 but the web-auth bundle templates you can get off cisco.com are far better and give more options for the web-auth bundle page options.