Cannot currently create files.  Please verify CME configuration or wait until previous file generation is complete, and then re-issue this command.

:oops:

Hi All,

please help me with this one. I am not able to figure this one out since last 2 days...

I am using GNS for A voice lab. i have chosen 3700 series router 3725 router .. and by using a cloud i am able to ping my laptop which is acting as a TFTP server for time bieng for the  router 3725 .

{NOW just to share i did this lab 1 month back sucessfully and i dont what ghost is there in the router which is not letting the magic happen this time..}

I issue the command

archive tar /xtract tftp://192.168.15.12/cme-full-7.0.0.0.tar flash:

and all the tar files gets extract to the flash of my router. (virtual flash in GNS.)

Then i make aliases

tftp-server flash:/phone/7945-7965/apps45.8-3-2-27.sbn alias apps45.8-3-2-27.sbn

tftp-server flash:/phone/7945-7965/cnu45.8-3-2-27.sbn alias cnu45.8-3-2-27.sbn

tftp-server flash:/phone/7945-7965/cvm45sccp.8-3-2-27.sbn alias cvm45sccp.8-3-2-27.sbn

tftp-server flash:/phone/7945-7965/dsp45.8-3-2-27.sbn alias dsp45.8-3-2-27.sbn

tftp-server flash:/phone/7945-7965/jar45sccp.8-3-2-27.sbn alias jar45sccp.8-3-2-27.sbn

tftp-server flash:/phone/7945-7965/SCCP45.8-3-3S.loads alias SCCP45.8-3-3S.loads

tftp-server flash:/phone/7945-7965/term45.default.loads alias term45.default.loads

tftp-server flash:/phone/7945-7965/term65.default.loads alias term65.default.loads

tftp-server flash:/phone/7945-7965/apps37sccp.1-1-1-1.bin alias apps37sccp.1-1-1-1.bin

after creating the aliases i hit LOAD command and

load 7945 SCCP45.8-3-3S.loads

As given in books when we hit load command i should get updating CNF files prompt.

CME_Voice(config-telephony)# load 7960 P00308000500

Updating CNF files

CNF files updating complete

BUt i dont get any.. however the command gets accepted..

secondly, when i try to create the cnf files manually

and issue the command  create cnf-files

I GET THE ERROR

Cannot currently create files.  Please verify CME configuration or wait until previous file generation is complete, and then re-issue this command.

Please suggest how can i solve this problem..

I have tried..

Reinstalling GNS and loading the image..for the router..

I have tried deleting the temp folder and trying all the steps again.

Thanks in advance